Placer County

Equipment Service Worker - I (#11601)

We are currently accepting applications for this position.
To apply, please close this pop-up window and then click on Current Openings.

$23.82-$29.74 Hourly / $4,128.80-$5,154.93 Monthly / $49,545.60-$61,859.20 Yearly

Apply as a Inter-Agency Transfer/Public Agency Eligible List applicant

Equipment Service Worker - II (#11602)

We are currently accepting applications for this position.
To apply, please close this pop-up window and then click on Current Openings.

$26.26-$32.78 Hourly / $4,551.73-$5,681.87 Monthly / $54,620.80-$68,182.40 Yearly

Apply as a Inter-Agency Transfer/Public Agency Eligible List applicant


DEFINITION

To fuel, clean and wash, inspect and safety check County-owned fleet cars, light trucks and motorized equipment; to provide semi-skilled repair service to County-owned light trucks and motorized equipment; to work directly for a line department with a large fleet, to monitor and maintain assigned fleet; and to provide automotive and heavy equipment parts and supplies to Fleet Services and Road Division automotive and equipment maintenance personnel.

DISTINGUISHING CHARACTERISTICS

Equipment Service Worker I
This is the entry-level class in the Equipment Service Worker series.  This class is distinguished from the journey by the performance of the more routine tasks and duties assigned to positions within this series.  Employees at this level are not expected to perform with the same independence of direction and judgment on matters allocated to the journey level.  Since this class is typically used as a training class, employees may have only limited or no directly related work experience.  Employees work under immediate supervision while learning job tasks.

Equipment Service Worker II
This is the full journey level class within the Equipment Service Worker series.  This class is distinguished from the Equipment Service Worker I by the full range of duties assigned.  Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit.  Positions in this class are flexibly staffed and are normally filled by advancement from the entry level.

SUPERVISION RECEIVED AND EXERCISED

Equipment Service Worker I
Receives immediate supervision from a Supervising Automotive Mechanic, Supervising Equipment Mechanic (Auburn), Senior Road District Supervisor (Tahoe), or assigned supervisor.

Equipment Service Worker II
Receives general supervision from a Supervising Automotive Mechanic, Supervising Equipment Mechanic (Auburn), Senior Road District Supervisor (Tahoe), or assigned supervisor.

EXAMPLES OF ESSENTIAL DUTIES

Duties may include, but are not limited to, the following:

  • Fuel and re-fuel vehicles and equipment; clean windshields and check and replace wiper blades; clean interiors, and wash and wax exteriors as needed; check and refill oil and other fluids; inspect tires and repair or replace as needed.
  • Check brakes and install brake pads, front wheel rotors, brake shoes and belts; inspect and install shock absorbers; repair or replace car locks, windows, window cranks, rear and side view mirrors, headlights, spotlights, tail and signal lights and replace fuses and connectors. 
  • Document work completed and supplies used; make out work orders for repair or service to be done by skilled automotive and equipment mechanics; test drive vehicles to determine driving condition; operate towing equipment as needed; order fuel and other supplies from vendors.
  • When assigned to the central garage, issue automotive and heavy equipment parts and supplies to users on a routine basis, as well as upon request for as-needed items. 
    Purchase parts and supplies; maintain adequate physical inventory; and maintain inventory records. 
  • When assigned to the central garage update open purchase orders; maintain and use catalogs and vendor order books; review and post invoices as received; work with vendors to expedite special and/or urgent orders.
  • Receive incoming parts and supplies; determine location for and physically stock received items in warehouse and yard; drive to various locations to pick up items or deliver items for contracted repair; purge and dispose of obsolete items.
  • When working for a line department, coordinate vehicle repairs with county garage; prepare mileage reports; maintain vehicle records; review monthly billing report; supervise part-time staff and assigned trustees; perform minor vehicle repairs; maintain list of assigned vehicles and inventory; install special equipment including light bars, spot lights, prisoner partitions and equipment stands.
  • Perform other minor facility and ground maintenance tasks as needed; assist other staff as needed.
  • Build and maintain positive working relationships with co-workers, other County employees, supply vendors and the public using principles of good customer service.
  • Perform related duties as assigned.

EXAMPLES OF NON-ESSENTIAL DUTIES

Duties may include, but are not limited to, the following:
  • Perform routine maintenance of shop and office areas.

MINIMUM QUALIFICATIONS

Equipment Service Worker I

Experience and Training
Any combination of experience and training that would provide the required knowledge and abilities is qualifying.  A typical way to obtain the required knowledge and abilities would be:

Experience: No experience is required.

Training: Equivalent to the completion of the twelfth grade.

Required License or Certificate:
Possession of a valid Class C California driver's license.  Proof of adequate vehicle insurance and medical clearance may also be required.

Equipment Service Worker II

Experience and Training
Any combination of experience and training that would provide the required knowledge and abilities is qualifying.  A typical way to obtain the required knowledge and abilities would be:

Experience: Two years of responsible experience performing duties similar to those of an Equipment Service Worker I in Placer County.

Training: Equivalent to the completion of the twelfth grade.

Required License or Certificate:

  • Some positions may require possession of a valid Class B driver's license.  Proof of adequate vehicle insurance and medical clearance may also be required.
  • When assigned to storekeeper duties: possession of license to purchase Freon.

KNOWLEDGE, SKILLS, AND ABILITIES

Equipment Service Worker I

Knowledge of:

  • Tools and equipment used in routine maintenance and repair of cars and light trucks.
  • Modern office procedures, methods and computer equipment.
  • Arithmetic and basic mathematical calculations.

Ability to:

  • On a continuous basis, know and understand operations and observe safety rules.
  • Intermittently analyze problem equipment; identify and locate equipment; interpret work orders; remember equipment location; and explain jobs to others.
  • Intermittently, sit while studying or preparing reports; bend, squat, climb, kneel and twist when performing installation of equipment; perform simple and power grasping, pushing, pulling and fine manipulation; regularly lift very heavy weight.
  • Operate forklift, hydraulic lift, hand cart, hand tools and light truck, flatbed truck or tow truck.
  • Analyze situations quickly and objectively, and determine proper course of action.
  • Prepare purchase orders and related documents; obtain information through interviews and dialogue; process multiple supply orders; and work effectively with interruptions.
  • Use a computer, calculator, two-way radio and telephone.
  • Work with various cultural and ethnic groups in a tactful and effective manner.
  • Communicate clearly and concisely, both orally and in writing.
  • Establish and maintain effective working relationships with those contacted in the course of work.

Equipment Service Worker II

In addition to the qualifications for Equipment Service Worker I:

Knowledge of:

  • Fleet Services Division (Auburn) or Roads Division (Tahoe) operations, policies and procedures.
  • County purchasing and procurement policies and procedures.
  • Automotive and heavy equipment parts and supplies.

Ability to:

  • Independently identify mechanical, hydraulic and electrical problems in light vehicles and perform minor mechanical and automotive repairs.
  • Independently read and understand technical reports and instructions and schematic drawings and diagrams.
  • Independently obtain information through interviews and dialogue; simultaneously process multiple supply requests; and work effectively with interruption.
  • Independently prepare purchase orders and related documents; forecast immediate and long-term supply and equipment needs.

CLASS: 11601; EST: 9/2/1995;
CLASS: 11602; EST: 9/2/1995;